Steel structures
Connection design, fabrication detailing and shop drawings a fabricator can put on the machine without redrawing them.
Send us a frame. You get a Tekla model, a designed connection set and drawings the shop can cut from.
Who this is for Steel fabricators, main contractors, and specialist subcontractors carrying a delegated connection scope.
Price this scopeWhat you receive
Fabrication detailing package
Assembly and single-part drawings marked to the fabricator’s own numbering standard, with CNC files issued beside them.
Connection design set
Delegated connection design to AISC 360, with a calculation note per connection type and a schedule tying every mark to its design.
Erection drawings and marking plans
Anchor-bolt setting-out, erection views by elevation, and a marking plan the erector can work from on site.
Advance bill of material
A material list by profile, grade and length, issued early so the mill order is not waiting on the drawings.
Miscellaneous metals set
Stairs, handrail, ladders, platforms and access steel, detailed to the same standard as the primary frame.
Approval and comment cycle
Drawings issued for review, comments answered by the engineer who detailed them, revisions tracked on a register.
The scope, at a glance
-
Steel building design
Steel building design to AISC 360 (LRFD and ASD) and SBC 306.
-
Connection design
Moment, shear, brace and base-plate connections, each with its calculation note.
-
3D modelling at LOD 400
Tekla Structures models at LOD 400: fabrication-ready, not illustrative.
-
Shop drawings
Assembly, single-part, anchor-bolt and erection drawings, marked to the fabricator's own numbering.
-
MTO and BOM
Material take-offs and bills of material read straight out of the model, so the mill order is not waiting on the drawings.
-
Anchor-bolt details
Anchor-bolt setting plans and embedment details, issued early for the civil works.
-
PEB review and as-built
Pre-engineered building review and as-built modelling against what was actually erected.
-
Every type of steel building
Industrial, commercial, warehouse, multi-storey, mezzanine, PEB, cold-formed, bridges and canopies.
- Code-compliant AISC, SBC, LRFD and ASD.
- Accurate and detailed Precision in every deliverable.
- Fabrication-ready Models and drawings a shop can cut from.
- Collaborative Clear communication, better results.
Connection design, fabrication detailing and shop drawings a fabricator can put on the machine without redrawing them.
How it is produced
The model is the drawing
Every sheet is a view of one Tekla model. A member change updates the sheets instead of starting them again.
Connections designed, not picked from a table
Each type is designed to AISC 360 and checked in IDEA StatiCa wherever the geometry leaves the standard cases.
Numbering agreed before detailing starts
Assembly marks, part marks and the drawing register are agreed with the fabricator at set-up, not invented later.
Checked by a second engineer
No sheet leaves the office on the strength of the person who drew it. The check is recorded on the sheet.
Shop feedback closes the loop
A query from the shop floor goes back to the detailer who raised the sheet, and the model is corrected first.
Projects delivered under this service
11 projects
NEOM Sports Village
Structural steel and BIM production for the sports pavilion buildings, from construction-stage models to coordinated deliverables.Sports & eventsNEOM, KSA
Siemens Energy Manufacturing Hub
Tekla and BIM production models across the manufacturing hub buildings, coordinated from model to fabrication documentation, with steel…IndustrialDammam, KSA
MDLBEAST Event Bridge
A full Tekla production model and fabrication deliverables for the event bridge, with erection engineering for night lifts on a live site.Sports & eventsRiyadh, KSA
Al Thumamah Bridge
Steel works on a major steel and precast interchange bridge: the erection sequence, and the steel supports for the precast slabs, designed…InfrastructureRiyadh, KSA
Reef Grain Factory
Architecture, steel and detailing from one office: cut straight by the fabricator. Master plan, production hall, silo structures and…IndustrialQassim, KSA2024
Lucid Advanced Manufacturing Plant 2 (AMP-2)
Structural steel design support for the advanced manufacturing facility, delivered as design sub-consultant within Al Bawani’s scope.IndustrialSaudi Arabia2025Software
- Tekla Structures
- IDEA StatiCa
- SAP2000
- AutoCAD
- Navisworks
- Trimble Connect
Standards and codes
- AISC 360
- AISC 303
- ASCE 7
- SBC 301
- AWS D1.1
- EN 1993
What the deliverable is
- Tekla model
- DWG
- PDF sheet set
- NC1 / DSTV
- IFC
- XLSX bill of material
Deliverables
Pick a discipline and tick what you need. Send the selection and its indicative budget range appears on screen and arrives in your inbox.
| Deliverables | Unit |
|---|---|
| Shop drawings: repetitive PEB / warehouse | per tonne |
| Shop drawings: typical commercial frame | per tonne |
| Shop drawings: industrial / heavy / AESS | per tonne |
| Connection design (delegated), AISC 360 | per tonne |
| Miscellaneous metals: stairs, handrail, platforms | per drawing |
| Erection drawings and marking plans | per tonne |
| Steel take-off and tender BoQ | per tonne |
Questions clients ask
Can you detail from a PDF set rather than a model?
Yes. We rebuild the frame in Tekla from your drawings and issue an RFI list for whatever the set does not resolve. The rebuild is priced as its own line.
Who carries responsibility for the connection design?
Delegated connection design is signed by the engineer who produced it, and the calculation notes are issued with the drawings for the engineer of record to accept.
What do you need before you can start?
Approved design drawings, the profiles and grades actually available to you, the fabricator’s numbering standard, and the erection sequence if it is already fixed.
How is a design change handled mid-package?
The change goes into the model, the affected sheets are reissued rather than the whole package, and the drawing register shows exactly what moved.
A question that is not here?
Ask the engineer who would run your project. Send the drawings and the answer comes back in writing.
Send us one package.
Send a package and you get a scope, a fixed price and a delivery date within two working days.
Related services
Structural design
Concrete and steel design with calculation notes a reviewer can follow, taken through to reinforcement detailing.
BIM coordination
A federated model, a clash register that closes, and coordinated sections issued per trade before installation starts.
LEED and green building
Hit your LEED and Mostadam targets with no surprises. Credits engineered into the design, evidence ready before the reviewer asks, and every comment…
